HiSmart HT260447 9-loop underfloor heating manifold set with NC 230 V thermal actuators and flow meters

The HiSmart HT260447 is a complete 9-loop manifold set for zoned hydronic underfloor heating. It combines a flush-mounted metal cabinet, a 9-loop collector, 9 flow meters and 9 normally closed 230 V thermal actuators.

Control and connections

• The manifold distributes warm water to individual heating zones; the flow meters support flow monitoring and hydraulic balancing.
• The normally closed actuators accept control signals from compatible programmable or non-programmable room thermostats or a heating controller.
• Each actuator connects through a VA80 adapter to a standard M30 valve thread.
• The set also includes two air-vent assemblies and 9 adapters for 16 mm heating-circuit pipes.

Cabinet specifications

• Flush-mounted light-grey metal cabinet: 745mmx645mmx118mm; depth: 110 mm.
• Door dimensions: 585 × 685 mm; latched door opens to approximately 135°.
• Number of flow meters: 9; number of thermal actuators: 9.

Thermal actuator specifications

• Operating type: NC (normally closed); supply: 230 V AC, 50/60 Hz.
• Starting current: maximum 300 mA; power consumption: 2 W per actuator.
• Cable length: 90 cm; operating temperature: 0 °C to +60 °C; storage temperature: -25 °C to +65 °C.
• Operating humidity: below 80%RH, non-condensing; protection rating: IP54.
• Actuator dimensions: Ø49.4 × 56.6 mm; warranty: 12 months.